The beige CO2-8WD-XSH Dual-Element Omnidirectional Headset Microphone from Point Source Audio pairs two microphone elements into a single housing to create a sleek form factor and a low-profile headset microphone. It can be used to capture audio and offers built-in microphone redundancy for wireless transmitters in live stage, theater, broadcast, and speech applications.
The CO2-8WD's dual elements are factory matched to a near identical ±0.5 dB difference and both elements are IP57 waterproof rated. This headset is built with an unbreakable boom that can bend 360°. The microphone cable splits approximately 9" above the connection to the bodypack to allow for ample room for separation of the transmitters. In addition, the mic is equipped with a 6' cable that terminates with two 4-pin mini X-Connectors for Shure, Line 6, JTS, Trantec, Carvin, and Beyerdynamic TG Gray transmitters.
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Transducer | Electret Condenser |
| Polar Pattern | Omnidirectional |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 136 dB SPL Peak |
| Impedance | 1400 Ohms @ 1 kHz |
| Sensitivity | 43 mV/Pa at 1 kHz |
| General | |
|---|---|
| Output Connector | TA4F/Mini XLR |
| Cable Length | 6' / 1.83 m |
| Operating Voltage | 1 to 10 V |
| Weight | 0.6 oz / 17 g |