PVSL 400/24-10 is a PVSL 400 series primary switched mode power supply with line monitor. Primary switched mode power supply with high power reserves for all automation requirements with a variety of parameter setting and display functions, including output current and output voltage monitoring. Intelligent additional functions for the input power to replace a variety of external devices such as diagnostic voltmeter, phase meter, hour meter. Safety standards are EN 61558-2-16, EN 60950-1, EN 61204-3 EMC.

• RS-232 interface, LCD, power input monitoring
• 3 LEDs and active signal outputs to indicate operating status
• Top boost to trip conventional circuit breakers, up to 200 % real power boost for 4seconds
• Stabilised and adjustable output voltage, output current and output voltage monitoring
• Service-friendly spring-loaded connector system, panel installation on mounting rails
• Input rated voltage is 3 x 400 - 500VAC, rated frequency range from 44Hz - 66Hz /0Hz
• Output rated voltage is 24VDC, output rated current is 10A, efficiency is 91.7% typical
• UL/CSA 60950 recognised, UL 508 listed approved
• Ambient temperature range from -25°C to +70°C
• Dimension is 57mm width x 127mm height x 179.5mm depth

Other details

Brand	BLOCK
Part Number	PVSL 400/24-10
Quantity	Each
Technical Data Sheet EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.